When Your Hot Water System Fails: Prompt Action

Get Quote

Nearly everybody will have their personal conception on the subject of What Would Cause My Electric Water Heater to Stop Working?.


No Hot Water — Water Heater Repair
Several modern-day residences use an electrical water heater for their furnace, as a result of its benefit as well as convenience of use. Nevertheless, much like any other electric devices, troubles might emerge with its use, suddenly. It can be really frustrating to awaken to a cool shower rather than a hot one or having your bathroom with water that isn't warm sufficient or even also hot. Whatever the instance might be, hot water heater troubles can be fairly aggravating. Luckily, we have actually made a listing of possible remedies to your water heater issues. There are a number of variables that might cause most of these problems, it could be a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety and security. Whatever the issue is, getting it dealt with must not pose too much of a problem if you follow these actions:

Check Your Power Supply:


As fundamental as this may appear, it is very needed. Without adequate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely turn it on and off again. Change any busted or worn-out fuse. Examine the appliance with power after these adjustments to see if it's now functioning.

Check the Burner in the Water Heater:


If it's not a power trouble, then attempt checking out your heating element if it is still functioning. Check each of your burner to be sure the issue isn't with any one of them. If any of them is defective, change that component and afterwards examine whether the warm water is back on.

Examine Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you might need to inspect the temperature level setups on your upper thermostat. Guarantee the breaker is switched off before doing anything. Open up the accessibility panel as well as press the red switch for temperature reset above the thermostat. This must aid warm the water. Turn the circuit breaker back on as well as inspect if the problem has been dealt with.

Call A Specialist:


If after changing all faulty parts and resetting your temperature, the water heater still isn't working, you might require to get in touch with a professional plumber for an expert point of view. The trouble with your heating system could be that the cold and hot faucets have actually been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, a professional plumber would certainly aid resolve the problem.

Conclusion


Water heater problems are not always significant. Many of them are due to small concerns like a blown fuse or worn-out burner. Changing the malfunctioning components must work. However, if you are still unable to solve the problem, give a call to your local plumber to come to get it dealt with.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


What Would Cause My Electric Water Heater to Stop Working?

As a serious person who reads about Hot Water Heater Repair, I think sharing that piece was beneficial. Sharing is good. You just don't know, you will be doing someone a favor. We thank you for reading our article about Hot Water Heater Repair.


Need help? Call.

Leave a Reply

Your email address will not be published. Required fields are marked *